AC Electrical Control Panel Enclosure Inverter Motor Control Box

Discription of production   control box Use and performance The control box is suitable for mining, enterprises, shopping malls, hotels, schools, airports, ports, hospitals, high-rise buildings, living quarters and other occasions, AC 50HZ, rated working voltage of AC 380V low-voltage power grid system, as power, light

Featured Products

Discription of production

   AC Electrical Control Panel Enclosure Inverter Electric Motor Control Box

control box

Use and performance

The control box is suitable for mining, enterprises, shopping malls, hotels, schools, airports, ports, hospitals, high-rise buildings, living quarters and other occasions, AC 50HZ, rated working voltage of AC 380V low-voltage power grid system, as power, lighting and power distribution For motor control, it is suitable for indoor wall-mounted and outdoor floor-mounted power distribution equipment. It is also used in the power system with AC 50HZ and voltage below 500V as fire-fighting pump control, submersible pump control, fire-fighting fan control, fan control, lighting power distribution control, etc. The control methods include direct start control, star delta step-down start control, autocoupling Various control methods such as step-down start control, inverter start control, and soft start control can also use isolation switches and fuse switches as isolation breaking points.

Electrical parameters

Rated working voltage AC 380V;
The working voltage of auxiliary circuit is AC 380V, 220V, DC 220V, 110V;
Rated frequency 50HZ
Rated insulation voltage 500V;
Rated working current 630A, 500A, 400A, 315A, 250A, 200A, 150A, 100A, 80A, 63A, 50A, 40A, 32A, 25A, 20A, 16A, 10A;
Short-circuit withstand current 10KA~35KA


Conditoin 

1 The ambient temperature is not higher than +40°C, the average temperature in a 24-hour period is not higher than +35°C, and the lower limit of the ambient air temperature is -5°C;
2 The air is clean, and the relative humidity does not exceed 50% when the temperature is +40°C.
A higher relative humidity is allowed at a lower temperature. For example, the relative humidity is 90% at +20°C. It should be considered that moderate condensation may occasionally occur due to temperature changes.
3 Pollution degree is 3
4 The altitude of the installation site shall not exceed 2000 meters;
5 Vertical installation on the floor, the installation inclination shall not exceed 5 degrees
6 The place where there is no violent vibration and impact, it is not enough to corrode the place such as the photoelectricity and components;
7 The transportation and storage temperature range is between -25°C and +55°C, and can reach +7-°C in a short time (not more than 24h);
8Special conditions of use shall be negotiated separately when ordering.


AC Electrical Control Panel Enclosure Inverter Electric Motor Control BoxAC Electrical Control Panel Enclosure Inverter Electric Motor Control BoxAC Electrical Control Panel Enclosure Inverter Electric Motor Control Box

Produciton Equipment


AC Electrical Control Panel Enclosure Inverter Electric Motor Control Box
AC Electrical Control Panel Enclosure Inverter Electric Motor Control Box
Debugging Equipment


AC Electrical Control Panel Enclosure Inverter Electric Motor Control Box

Production case

AC Electrical Control Panel Enclosure Inverter Electric Motor Control BoxAC Electrical Control Panel Enclosure Inverter Electric Motor Control Box
Why choose our factory?

We specialize in integrated services such as R&D, design, manufacturing, sales, and technical consulting of complete sets of power distribution equipment.
The main products and services include: 35kv and below high, medium and low voltage switchgear, 12-40.5 prefabricated substation (switch station), AC/DC integrated system, EPS emergency power supply, distribution box, power box, cable tray, Enclosed bus duct, common box bus, pre-branch cable box and maintenance of power equipment, etc.

ATTENTION:

1.The payment term: We accept TT,30% deposit and Pay 70% before shipment.
2.The delivery time: Usually it will take about 15-20 days.
3.The standard of package: Usually use strong wood case for protection.

Packing
AC Electrical Control Panel Enclosure Inverter Electric Motor Control Box
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours